Habring2  Felix #308 White Lacquer Dial

Felix is the starter model by Habring² and fortunate because it celebrates the first anniversary of the Habring² brand. Although it shares the same base with its siblings, it differs through the omission of the Habring² module system. Whilst all other Habring² watches were and still are configurable and extendible at any time – including after their purchase – Felix does not share this characteristic. Its movement, the A11B (B for Basis), represents the simplest mechanical method of measuring time – albeit with the utmost precision. Felix – and its siblings – never need fear the chronometer certification. Felix concentrates on the essential. It forgoes the former and familiar extendible screwed case and is therefore leaner than its siblings. A diameter of 38.5 mm and a remarkable case height of only about 7 mm make it an exceptionally attractive contemporary. Its near ascetic appearance is underscored by a fine-grained or satinated silver-white dial.

Felix’ technical details

• Diameter 30 mm; height 4.2 mm
• Hour and minute hands; small second at 9 o'clock
• 28.800 alternates per hour (4Hz)
• Hand-wound with 48 hours' power reserve
• Tangential screw fine adjustment
• Anti-magnetic escapement with a Carl Haas hairspring in chronometer quality
• KIF shock protection pursuant to DIN and NIHS
• 18 rubies
• Elaborately refined by hand with polished edges, decorative engravings, perlage, etc.
• 50 service-relevant single components (99 parts in total)

Case:

• Stainless steel, three-part, 38.5 mm diameter
• Water resistant to the depth equivalent of 30 metres
• Spherical sapphire crystal
• Double-sealed crown, sapphire crystal caseback
• Consecutive engraved serial number between the lugs at 6 o'clock

Dial/hands:

• Several versions available